top of page
Logo of Post Weld Heat Treatment - Portal
Industrielle Rohrinspektion mit Heizmatten.png

CONTROLLED HEAT IS THE KEY TO SUCCESS

Preheating and welding

Controlled preheating is an important component of demanding welding processes. By selectively heating metallic materials, temperature differences are reduced, cooling rates are influenced, and the risk of cracking is decreased.

 

Especially with high-strength and heat-resistant steels, precise temperature control helps to improve the quality of welded joints and to ensure the required material properties.

Preheating & Welding

Controlled heat for safe and high-quality welds

Controlled preheating of metallic materials is an important component of demanding welding processes. Particularly with high-strength, heat-resistant, and alloy steels, precise temperature control can be crucial in preventing welding defects and ensuring the required properties of the welded joint.

 

Preheating allows for targeted control of the thermal conditions in the weld area. This reduces the cooling rate, decreases the risk of hydrogen-induced cold cracking, and limits the formation of undesirable microstructures.

In industrial practice, various methods are used, including electrical resistance heating, inductive preheating and other application-specific heating technologies.

 

This specialist portal provides information on the technical basics, suitable procedures, typical areas of application and the requirements for proper temperature control during welding.

Why is preheating important when welding?

PWHT Logo of Post Weld Heat Treatment - Portal

A welded joint is subjected to considerable thermal stresses during the welding process. Due to the localized heat input, large temperature differences arise between the weld seam, the heat-affected zone, and the base material.

 

Without proper temperature control, unfavorable microstructures, high hardness values and critical stress states can develop.

 

Controlled preheating offers several significant advantages.

PWHT Logo of Post Weld Heat Treatment - Portal

Reduction of the risk of cold cracking

Hydrogen-induced cold cracking can occur, especially in high-strength and crack-prone steels. A suitable preheating temperature slows down the cooling process and promotes hydrogen diffusion.

PWHT Logo of Post Weld Heat Treatment - Portal

Controlled cooling rate

The targeted heating of the base material influences the cooling conditions in the area of the weld joint and can limit the formation of undesirable hard structural components.

PWHT Logo of Post Weld Heat Treatment - Portal

Reduction of thermal temperature differences

Preheating reduces the temperature difference between the welding area and the adjacent base material. This reduces thermal stresses and unfavorable stress conditions during the welding process.

PWHT Logo of Post Weld Heat Treatment - Portal

Improved welding conditions

A defined preheating and interpass temperature supports uniform, reproducible welding conditions and controlled processing of demanding materials.

PWHT Logo of Post Weld Heat Treatment - Portal

Compliance with technical requirements

Many industrial welding processes require specific preheating temperatures. These requirements are derived from welding procedure specifications, material specifications, and applicable regulations.

Lächelnder Techniker an isolierter Rohrleitung.png
PWHT Logo of Post Weld Heat Treatment - Portal

Preheating with electrical resistance heating

Flexible heat treatment for pipelines, tanks and welds
PWHT Logo of Post Weld Heat Treatment - Portal

Electrical resistance heating is one of the established methods for the controlled preheating of metallic components.​

In this process, electric heating elements are positioned directly on the workpiece. The heat is generated in the heating elements and transferred to the base material.

 

Flexible heating mats or ceramic resistance heating elements can be adapted to different component geometries. Suitable thermal insulation reduces heat loss and improves temperature distribution.

PWHT Logo of Post Weld Heat Treatment - Portal

The process is particularly suitable for pipelines, tanks, flanges, welded joints and complex industrial components.

Modern measurement and control technology enables continuous monitoring of the temperature and demand-based adjustment of the heating output.

 

Typical applications: pipeline construction, tank construction, power plant technology, chemical industry, plant assembly and industrial maintenance.

Advertisement

Industrielles Rohrvorwärmen mit Schweißtechnik.png

Preheating with induction

Schweißer bei der Arbeit zur Vorbereitung von PWHT Spannungsarmglühen

Efficient heat input for demanding applications

In inductive preheating, heat is generated directly in the electrically conductive material through electromagnetic induction.

 

A changing magnetic field induces electric currents in the component, leading to targeted heating. The heat input can be controlled via suitable induction systems.

 

Depending on the material, geometry and plant technology, the process enables fast and efficient heating.

 

Especially with larger pipe diameters, thick-walled components and recurring welding tasks, induction welding can offer technical and economic advantages.

 

The required temperature is monitored by suitable measuring systems and set according to the welding instructions.

Preheating of pipelines and welds

Industrielle Rohrleitungen im Abendlicht.png

Temperature control for demanding piping systems

In industrial pipeline construction, preheating is one of the important preparatory measures for the production of high-quality welded joints.

 

The required preheating temperature depends, among other things, on the chemical composition of the material, the wall thickness, the welding process, the hydrogen content of the welding filler material and the respective technical requirements.

 

In practice, suitable heating elements are positioned in the area of the planned weld. The heating must cover a sufficiently large area of the base material.

During welding, the temperature is monitored to ensure that the required conditions are maintained even for multi-layer welded joints.

 

Especially with heat-resistant materials such as 13CrMo4-5, 10CrMo9-10, P91 and P92, material-appropriate temperature control and, if necessary, further heat treatment steps are of great importance.

Preheating temperature and interlayer temperature

Industrielle Rohrisolierung im Rotlicht.png

Two crucial factors for weld quality

The preheating temperature refers to the temperature to which the base material must be heated before welding begins.

 

The interpass temperature describes the temperature in the welding area immediately before the application of another weld layer.

 

Both temperatures must be maintained according to the welding instructions. These instructions may specify a minimum preheating temperature as well as a maximum permissible interpass temperature.

 

Too low a temperature can increase the risk of cold cracking. Conversely, too high an interpass temperature can adversely affect the microstructure development and mechanical properties of the weld.

 

The selection of suitable temperature measurement methods and the correct positioning of the measuring points are therefore essential components of a controlled welding process.

Preheating and PWHT –

Two processes, one overall thermal process

Industrielle Rohrheizung im Werkseinsatz.png

Preheating and heat treatment after welding pursue different, but interconnected, goals.

 

While preheating influences the conditions before and during welding, Post Weld Heat Treatment (PWHT) serves for targeted heat treatment after completion of the welding work.

 

Depending on the material, subsequent heat treatment may be necessary to reduce residual stresses, adjust hardness values, or achieve a suitable microstructure.

PRE-HEATING

WELDING

PWHT Logo of Post Weld Heat Treatment - Portal

PWHT

A comprehensive consideration of all thermal process steps is particularly important for high-temperature-resistant and demanding alloy steels.

Application areas for industrial preheating

PWHT Logo of Post Weld Heat Treatment - Portal

Power plant and energy technology

Preheating of steam lines, boiler components and high-temperature resistant materials during new construction, repair and maintenance.

PWHT Logo of Post Weld Heat Treatment - Portal

Chemical and petrochemical industry

Controlled heating of welded joints on process pipelines, pressure vessels and industrial equipment.

PWHT Logo of Post Weld Heat Treatment - Portal

Pipeline and plant construction

Preheating of welded piping systems of different diameters and wall thicknesses.

PWHT Logo of Post Weld Heat Treatment - Portal

Steel and container construction

Targeted temperature control during the manufacture and processing of welded structures, pressure vessels and large-format steel components.

PWHT Logo of Post Weld Heat Treatment - Portal

Industrial maintenance

Mobile preheating processes for repair welding, plant overhauls and technical shutdowns.

Industrieraffinerieanlage

Mobile preheating technology for industrial applications

Industrielle Rohrwärmebehandlung bei Sonnenuntergang_edited_edited_edited.jpg

Not every component can be transported to a stationary plant for heat treatment.

 

Mobile heating systems are particularly necessary for large pipeline systems, permanently installed tanks and complex industrial plants.

 

Mobile resistance and induction heating systems enable controlled preheating directly at the point of use. Depending on the technical specifications, the heating systems can be adapted to different component sizes and installation situations.

 

Temperature monitoring is carried out using suitable measuring and control technology. This allows defined thermal conditions to be created even during demanding assembly and maintenance work.

Materials and technical requirements

Industrielle Rohrleitungen im Abendlicht (1).png

Not all steels require the same preheating temperature. The selection of the appropriate temperature depends on the specific properties of the material and the prevailing welding conditions.

 

The material groups are particularly relevant:

 

  • Heat-resistant chromium-molybdenum steels such as 13CrMo4-5 and 10CrMo9-10

  • High-temperature martensitic steels such as P91, P92 and X20

  • High-strength and alloyed pressure vessel steels

  • Fine-grained structural steels and high-strength structural steels

  • Pipeline steels according to API specifications

  • Boiler and pressure vessel steels such as P235GH and P355GH

 

The portal's material database provides further information on material numbers, material properties, annealing temperatures and suitable heat treatment processes.

Pipeline-Schweißprüfung im Raffineriewerk.png

Standards and quality assurance

Various technical regulations and standards can be relevant for the planning and execution of preheating.

This includes, for example, the EN 1011 series of standards, qualified welding instructions according to EN ISO 15609 and EN ISO 15614, as well as application-specific regulations from pressure vessel and pipeline construction.

 

The required temperatures, measurement methods and documentation requirements must be determined according to the specific project.

 

A traceable temperature monitoring system supports compliance with welding parameters and quality assurance.

Frequently asked questions about preheating and welding

bottom of page